 |
sympleSEQ by Hexinverter.net"The simple to build analog step-sequencer" |
|
The sympleSEQ is an 8 step CV and Gate sequencer from Hexinverter.net Available as a pcb set from Hexinverter.net and also by order as a finished module from Re:Synthesis.
|
|
By kind permission of Stacy Gaudreau, the creator of the sympleSEQ project, I am proud to make available a selection of panels available. These will be in MU and Euro format, though some permutations may be available on MOTM panels as custom commissions.
|
|
NEW! The seqSQUARED programmable pattern controller for CV & Gate sequencers, the perfect partner to your sympleSEQs. Visit the Indiegogo page for more info. Re:Synthesis will be producing a MU version of the panel of course, watch this space!
|
|
 |
 |
|
|
|||||||
| Name | Width |
Image |
Price/Each (GBP) |
Add to cart**(quantities,may be altered in the cart) |
|||
|
sympleSEQ Panels |
|||||||
| Single MU (for 16mm knobs & Clock input. Run/Reset toggle) | 1 |
|
£20.00 | ||||
| Single MU (for 16mm knobs & Clock input. Run/Hold/Reset toggle) | 1 |
 |
£20.00 | ||||
| Single MU (for 16mm knobs without Clock input. Run/Hold toggle) | 1 | £20.00 | |||||
| Single MU (for use without knobs - has sideways pot graphics to match pot shaft ident) | 1 | £20.00 | |||||
| Quad MU | 4 |
 |
£50.00 | ||||
| Dual Euro | (42HP) |
 |
£35.00 | ||||
| Single MOTM 5U Slave (No speed pot or Run/Pause etc) | 1U |
 |
£20.00 | ||||
| Mounting kits | Two mounting kits are available: A single channel set of PCB spacers, black button-head hex-drive screws and LED stand-offs or as above but no LED stand-offs | ||||||
| Knobs for sympleSEQ (13.5mm diameter for 6.35mm 1/4" shaft) |
 |
||||||
| Special toggle switch (ON-ON-ON DPDT for single MU version with combined "Run-Hold-Reset") |
 |
||||||
|
sympleSEQ Modules |
Built to order complete tested modules* | ||||||
| Single MU | 1 |
 |
£125.00 | ||||
| Quad MU | 4 | £350.00 | |||||
| Dual Euro | (42HP) | £225.00 | |||||
| *Completed modules are built to order and subject to variable lead times, please enquire before ordering if your requirement is time critical! | |||||||
| Please email panels(at)resynthesis(dot)co(dot)uk to discuss your requirements | |||||||
| Shipping will be invoiced when panels are ready to ship based on the actual consignment weight, size and specific delivery requirements. | |||||||
