| The above modules are not in the order they
would necessarily be! (console panels are not shown) |
| Module No. |
Count |
Module Name |
|
| 901 |
1 |
Voltage Controlled Oscillator |
|
| 901A |
|
Oscillator Controller |
|
| 901B |
9 |
Oscillator |
|
| 902 |
3 |
Voltage Controlled Amplifier |
|
| 903A |
1 |
Random Signal Generator |
|
| 904A |
1 |
Voltage Controlled Low-Pass Filter |
|
| 904B |
1 |
Voltage Controlled High-Pass Filter |
|
| 904C |
1 |
Filter Coupler |
|
| 905 |
1 |
Reverberation unit |
|
| 910 |
1 |
PSU |
|
| 911 |
3 |
Envelope Generator |
|
| 911A |
1 |
Dual Trigger Delay |
|
| 912 |
1 |
Envelope Follower |
|
| 914 |
1 |
Extended Range Fixed Filter Bank |
|
| 950 |
1 |
Keyboard Controller |
|
| 956 |
1 |
Ribbon controller |
|
| 984 |
1 |
Four Channel Mixer |
|
| 992 |
1 |
CV Attenuator Panel |
|
| 993 |
1 |
Trigger & Envelope Voltage Panel |
|
| Panel No. 3 |
4 |
Each including: Four I/P Mixer with +/- and - output
jack multiples, Attenuator, 2 trunk lines and CV switches |
|
| Panel No. 2 |
1 |
Including: Low-pass and High-pass filters, jack multiples.
Three CV and trigger outputs |
|
| Panel No. 8 |
1 |
Power switch |
|
| Patch cord |
14 |
30 cm patch cord |
|
| Patch cord |
8 |
60 cm patch cord |
|
| Patch cord |
6 |
90 cm patch cord |
|
| Patch cord |
6 |
120 cm patch cord |
|
| Patch cord |
4 |
150 cm patch cord |
|
| Trigger cord |
2 |
30 cm 'S' trigger cords |
|
| Trigger cord |
2 |
90 cm 'S' trigger cords |
|
|
|
|
|
| Price in 1972 £4455 |
|
|
|
|
|
| The Model 3 was available as the 3C or 3P for
cabinet or portable versions respectively. |
|
|
|
|
| Actual 3C system picture from Moog brochure |
|
|
|
|
|
992 993
905